Paint, wheels and leather interiors — protected with products chosen for each surface. Serving drivers in Miramar, Pembroke Pines, Weston and across Broward County.
Ceramic coating is a liquid polymer that cures into a hard, transparent layer on a clean, prepared surface. On automotive paint it bonds chemically with the clear coat instead of sitting on top of it like wax — which is why a professional coating is measured in years rather than weeks.
Shine to Drive treats coating as a preparation job first. Washing, chemical and mechanical decontamination and, where needed, paint correction come before any coating goes on, because a coating seals in whatever is underneath it. We then use products chosen for each specific surface: AG Pro professional coating for paint, a wheels-off process for rims, and GYEON Q² LeatherShield EVO for compatible leather.
We work with vehicle owners throughout Miramar, Pembroke Pines, Weston and the surrounding Broward County communities, where constant UV, salt air and summer rain are exactly the conditions a coating is designed for.
BUILD YOUR QUOTE BOOK NOW
Ceramic coating is a liquid polymer that is applied to a clean, prepared surface and then cures into a hard, transparent layer. On automotive paint it chemically bonds with the clear coat rather than sitting on top of it like wax, which is why it lasts years instead of weeks. The cured layer is hydrophobic, meaning water beads up and rolls off instead of sheeting and drying in place.
It adds a sacrificial barrier between your vehicle's surface and everything South Florida throws at it — UV, salt air, rain, bug splatter, bird droppings, brake dust and road grime. Contamination sits on the coating instead of etching into paint, leather or wheel finish, so it releases with far less effort during a normal wash. It also deepens gloss on paint and holds that look for years.
For most owners in Broward County, yes — if you plan to keep the vehicle a few years and you want washing to get easier. A coating costs more up front than wax, but it replaces several years of re-waxing, protects against the UV and salt-air exposure that fades paint here, and keeps resale condition intact. If you are selling the car in a few months, a paint correction and sealant is usually the better spend.
UV radiation and the oxidation and fading it causes; chemical etching from acid rain, bird droppings and industrial fallout; water spotting; and the everyday bonding of dirt, road film, brake dust and iron particles. It is protection against contamination and chemical attack — not armour. It does not stop rock chips, door dings or deep scratches, and no coating makes a surface scratch-proof.
It depends on the surface and the product. For automotive paint, the AG Pro professional coating we use carries a manufacturer durability rating of 5 years or 60,000 miles. For leather interiors, GYEON rates Q² LeatherShield EVO at roughly 18 months. Real-world life always depends on how the vehicle is washed, stored and driven — a garage-kept car that gets proper maintenance washes will outlast one parked outside and run through brush car washes.
Two things: preparation and product tier. Most of the work in a professional coating happens before any coating is applied — washing, chemical decontamination, iron and tar removal, and correcting or refining the surface, because a coating locks in whatever is underneath it. Professional coatings are also formulated for controlled application by installers rather than for a consumer wipe-on process, and they are applied panel by panel in the right conditions.
Shine to Drive coats three surfaces, each with a product built for it: automotive paint and clear coat, wheels and rims, and compatible leather or synthetic leather upholstery. Glass coating is also available as an add-on. Each surface needs its own chemistry — a paint coating is not a substitute for a leather coating, and vice versa.
Paint, wheels and leather wear differently and need different chemistry. Each service has its own page with the full process, what it protects against and its honest limits.
Protect your vehicle's paint with professional AG Pro ceramic coating. Full decontamination and prep, then a coating the manufacturer rates at 5 years or 60,000 miles.
LEARN ABOUT PAINT COATING →
Wheels-off ceramic protection designed to make brake dust and road grime much easier to remove. Faces, barrels and inner lips where the wheel design allows. A two-day service.
LEARN ABOUT WHEEL COATING →
Protect compatible leather and synthetic leather surfaces with GYEON Q² LeatherShield EVO — an SiO₂-based coating that leaves the OEM look and feel unchanged.
LEARN ABOUT INTERIOR COATING →Water beads and sheets off instead of sitting on the surface and drying into spots. Rain does more of the rinsing for you, which matters through a South Florida summer.
Florida sun is the main thing that fades paint and dries out leather. A coating takes that UV exposure first, slowing oxidation, chalking and color loss underneath.
Bird droppings, bug splatter, tree sap, acid rain and industrial fallout sit on the coating instead of etching directly into the clear coat, so there is time to remove them safely.
The real day-to-day benefit. Contamination has less to grip, so a normal wash removes more with less scrubbing — which also means fewer wash-induced swirls over the years.
On paint, the cured layer adds optical clarity and depth over a properly prepared finish, and holds it far longer than a wax that flashes off in a few weeks.
Paint, wheels and leather are the three things a buyer or appraiser looks at first. Keeping them from degrading is cheaper than restoring them later.
Most of a ceramic coating job is preparation. This is the sequence every Shine to Drive coating follows, whatever surface is being coated.
We look at the actual condition of the surface in daylight — paint defects, wheel contamination, leather wear — and tell you what the coating will and will not fix before anything is quoted.
A full wash followed by dedicated decontamination to pull out embedded iron particles, brake dust and tar that a wash alone leaves behind.
Clay or equivalent surface work to remove bonded contamination, so the coating meets bare, clean substrate rather than a layer of grit.
A coating seals in whatever is underneath it. Where swirls or oxidation would be locked in, we recommend paint correction first.
A final prep wipe strips off polishing oils and residues so the coating can bond directly to the surface instead of to a film.
Applied panel by panel in controlled conditions, levelled at the correct flash point, and inspected under light for high spots before moving on.
The coating needs undisturbed cure time before exposure to water. We tell you exactly how long for your service — wheels, for example, cure roughly 24 hours off the vehicle.
You get plain-language aftercare: how soon you can wash it, what to wash it with, and what to keep away from it.
| Carnauba Wax | Paint Sealant | Ceramic Coating | |
|---|---|---|---|
| How it holds on | Sits on the surface | Synthetic layer on the surface | Bonds chemically with the clear coat |
| Typical durability | Weeks to a few months | Several months to about a year | Years — AG Pro rates its professional coating at 5 years / 60,000 miles |
| Water behavior | Beads early, fades quickly | Good beading, gradual decline | Strong, long-lasting beading and sheeting |
| Chemical resistance | Low — strips with detergents | Moderate | High — resists etching from fallout and acid rain |
| Preparation required | Wash | Wash and decontamination | Full decontamination and, where needed, correction |
| Scratch protection | None | None | Not scratch-proof; reduces wash-induced swirling |
| Best for | Short-term warmth and gloss before a sale or show | A season of protection at lower cost | Multi-year protection and easier washing |
The best time to coat is before the finish has degraded. Coating a new car preserves the factory paint and interior rather than trying to bring them back later.
If you are holding the vehicle for several years, a coating usually costs less than repeated waxing over the same period and protects the surfaces the whole time.
Salt air off the coast, summer downpours, heavy sun and highway grime on I-75 and the Turnpike are exactly the conditions a coating is built for.
If wash day has become a fight with brake dust and water spots, easier maintenance is the benefit you will actually notice every week.
Ceramic coating is quoted per vehicle. Final pricing is determined upon arrival and inspection of your vehicle, based on its size, the surfaces being coated and the condition of those surfaces. Build your quote to get started.
Shine to Drive is based in Pembroke Pines, FL 33029 and provides ceramic coating services for vehicle owners in Miramar, Pembroke Pines, Weston and the surrounding Broward County communities, with parts of Miami-Dade County also covered.
Ceramic coating is a liquid polymer applied to a clean, prepared surface that cures into a hard, transparent layer. On paint it bonds chemically with the clear coat instead of resting on top of it like wax, creating a hydrophobic barrier that lasts years rather than weeks.
Ceramic coating is quoted per vehicle because the price depends on which surfaces you are coating, the size of the vehicle and the amount of preparation the surface needs. Build a quote online or call (786) 265-9595 and we will give you a real number after we see the vehicle.
For most owners keeping a vehicle more than a couple of years, yes. Constant UV, salt air and summer rain are the conditions that fade paint and dry out leather fastest, and a coating takes that exposure instead of the surface underneath. It also makes every wash easier.
It depends on the surface and product. The AG Pro professional paint coating we use carries a manufacturer durability rating of 5 years or 60,000 miles. GYEON rates its Q² LeatherShield EVO leather coating at roughly 18 months. Actual life depends on how the vehicle is washed, stored and driven.
No. Ceramic coating is chemical and contamination protection, not impact protection. It does not prevent rock chips, door dings or deep scratches, and no coating makes a surface scratch-proof. It does reduce the light swirling that comes from washing, because contamination releases more easily and needs less scrubbing.
Automotive paint and clear coat, wheels and rims, and compatible leather or synthetic leather upholstery. Glass coating is available as an add-on. Each surface uses a product formulated for it rather than one coating applied everywhere.
Yes. A coating makes washing easier, not unnecessary. Contamination still lands on the surface; it just releases with far less effort. Regular maintenance washing is also what determines how long the coating actually lasts.
We can, but we will advise against it. A coating locks in whatever is underneath, so defects get sealed in for the life of the coating. Where the paint needs it, we recommend paint correction first and then coat the corrected finish.
Shine to Drive is a mobile detailing service based in Pembroke Pines, FL 33029, serving Miramar, Weston, Plantation, Davie, Cooper City, Southwest Ranches, Hollywood, Sunrise and surrounding Broward County areas. Coating work needs controlled conditions and cure time, so we confirm the arrangements for your specific service when you book.
Build a quote online, book through Calendly, or call (786) 265-9595. Wheel coating is a two-day service, so we schedule the drop-off and reinstall together when you book.
Tell us what you want coated and we will quote it after inspecting the vehicle.
BUILD YOUR QUOTE BOOK NOW CALL (786) 265-9595